Xyris 2000 TL Surface Profiler (Triangulation Laser) System Example
The Xyris 2000 TL is a versatile surface profiler, integrating size and speed in one convenient package. It can be manufactured to a variety of specifications encompassing a range of sensor and motion system options. Systems are typically up to 200 mm x 300 mm scanning areas but larger variants are available on request. The triangulation laser offers high speed scanning at low cost. The Xyris 2000 can also be supplied with the WL and CL sensors (see sensor section).

  
 
Xyris 2000TL system with 100mm x 100mm motion system and an automatic Z stage for adjustment of the sensor stand off distance. Above shows Ischnoptilus elegans, right fore and hind wings (MNHN-LP-R.51288), related to Odonata (damselfly, dragonfly), Commentry, Allier, France, 300 million years (Upper Carboniferous) measured with a Xyris 2000TL at a resolution of 481 x 321 points over an area of 24.0 x 16.0 mm, with a 50µm grid resolution in X,Y plane.  

Motion Table Specifications

Travel

Resolution

Feedback

On Axis Accuracy

Max Speed

50-600mm

0.1 - 1.25 μm

Linear/rotary encoder

1-10 μm

25 - 200 mm/sec

 
TL Sensor (Twin Detector) Specifications

Type

Illumination Source

Spot size

Measurement Range

Stand Off Distance

Sensor Resolution

Sampling rate
TL 785nm laser (red)
(685nm laser optional)		 30/70 μm 2.5-20.0mm 15/30mm 0.25-2.0 μm 100kHz